EconoSLC™ | |
---|---|
SERIES | EN-C09XXXGGPX |
Interface | SATA III (up to 6Gb/s) |
Connector | 52 Pin |
Physical Form Factor | 26.88mm (L) x 29.85mm (W) x 4mm (H) |
Industry Standard | MO-300 |
Flash Type | Toshiba A19 MLC |
Density | 4GB ~ 64GB |
Data Retention | 10 years FOB / 1 Year EOL |
Operating Temperature | Commercial: 0°C to 70°C Industrial: -40°C to 85°C |
Shock | 1500 G |
Vibration | 20 G |
Humidity | 85% RH 85°C, 1000 Hrs |
Read Performance | up to 530 MB/s |
Write Performance | up to 200 MB/s |
Voltage | 3.3V |
Power – Read | Up to 1,730mW |
Power – Write | Up to 1,640mW |
Power – DEVSLP | Up to 5mW |
Part Number | EN-C09XXXGGPX |
Envoy Data Memory’s EconoSLC mSATA mini delivers all the advantages of flash disk technology with the Serial ATA I/II/III interface and is fully compliant with the standard mSATA-mini form factor, known as JEDEC MO-300 standard. The module is designed to operate at a maximum operating frequency of 300MHz with 40MHz external crystal. Its capacity could provide a wide range up to 128GB. Moreover, it can reach up to 510MB/s read as well as 200MB/s write high performance based on Toggle 2.0 EconoSLC flash (with 32MB SDR enabled and measured by CrystalDiskMark v3.0). The power consumption of the mSATA mini module is much lower than traditional hard drives.
Solid State Drives (SSDs) are very robust and low power replacements for Hard Disk Drives (HDDs). SSDs have no moving parts, so vibration and shock tolerance are greatly improved over mechanical Hard Disk Drives, resulting in a much better solution for mobile applications. Serial ATA (SATA) SSDs use the standard SATA interface, and are capable of up to 6Gbps transfer rates (SATA III). Envoy Data Memory offers a broad selection of SATA SSD products that meet the harsh s of applications in both commercial and industrial markets. Our mSATA mini SSDs are offered in commercial or industrial temperature range, made with Econo Single Level Cell (EconoSLC™) NAND Flash.
Toll Free: 800-368-6971
Telephone: 480-829-6565