EconoSLC™ Based Industrial mSATA SSDs

MO-300

EconoSLC™ Based Industrial mSATA SSDs

SERIES	EN-B09XXXGGPX
Interface	SATA III (up to 6GB/s)
Connector	52 Pin
Physical Form Factor	50.8mm x 29.85mm x 4mm
Industry Standard	MO-300
Flash Type	Toshiba A19 MLC
Density	2GB ~ 256GB
Data Retention	10 years FOB / 1 Year EOL
Operating Temperature	Commercial: 0°C to 70°C Industrial: -40°C to 85°C
Shock	1500 G
Vibration	20 G
Humidity	85% RH 85°C, 1000 Hrs
Read Performance	up to 510 MB/s
Write Performance	up to 190 MB/s
Voltage	3.3 VDC
Power – Read	Up to 2,130mW
Power – Write	Up to 2,050mW
Power – DEVSLP	Up to 5mW
Part Number	EN-B09XXXGGPX

Envoy Data Memory’s mSATA delivers all the advantages of flash disk technology with the Serial ATA I/II/III interface and is fully compliant with the standard mSATA form factor, known as JEDEC MO-300 standard. The module is designed to operate at a maximum operating frequency of 300MHz with 40MHz external crystal. Its capacity could provide a wide range up to 512GB. Moreover, it can reach up to 510MB/s read as well as 200MB/s write high performance based on Toggle 2.0 MLC flash (with 8MB/32MB SDR enabled and measured by CrystalDiskMark v3.0). Meanwhile, the power consumption of the mSATA module is much lower than traditional hard drives.

Solid State Drives (SSDs) are very robust and low power replacements for Hard Disk Drives (HDDs). SSDs have no moving parts, so vibration and shock tolerance are greatly improved over mechanical Hard Disk Drives, resulting in a much better solution for mobile applications. Serial ATA (SATA) SSDs use the standard SATA interface, and are capable of up to 6Gbps transfer rates (SATA III). Envoy Data Memory offers a broad selection of SATA SSD products that meet the harshest of memory applications in both commercial and industrial markets. Our mSATA SSDs are offered in commercial or industrial temperature range, made with Econo Single Level Cell (EconoSLC™) NAND Flash.