SLC Industrial Micro SD Cards

SLC Industrial Micro SD Cards

	MLC
SERIES/Data Sheet	EN-L0JXXXGDSX
Interface	SD 3.0
Connector	8 Pin
Physical Form Factor	15mm(L) x 11mm(W) x 1.0mm(H)
Industry Standard	Secure Digital 3.0 (SD 3.0)
Flash Type	Toshiba 24nm SLC
Density	128MB~4GB
Data Retention	10 years FOB / 1 Year EOL
Operating Temperature	Commercial: 0°C to 70°C Industrial: -40°C to 85°C
Shock	1500 G
Vibration	20 G
Humidity	85% RH 85°C, 1000 Hrs
Read Performance	up to 20MB/s
Write Performance	up to 20MB/s
Voltage	2.7 – 3.6 VDC
Power – Read	100mA to 200mA
Power – Write	100mA to 200mA
Part Number	EN-L0JXXXGDSX

Quick Contact

Your Name:*

Your Email:*

Your Message:*

SLC Micro SD Cards

EN-L0JXXXGDSX series µSD Cards are a great choice for high reliability industrial equipment, embedded computing and data-logging applications.

S.M.A.R.T. features: Envoy Data Memory offers the EN-L0JXXXGDSX series Industrial µSD Cards cards with Command 56 Support (CMD56) that enables system designers to monitor the life of the µSD and monitor other important aspects of the µSD like: Controller version, Flash type, Firmware version, Endurance Life Ratio, Good Block Ratio, Maximum Bad Block Replacement, ECC bit Setting, Total Refresh Count, Power Up count, Abnormal Power On Count, Erase Count, and Bad Blocks.

Enhance Reliability Firmware: The EN-L0JXXXGDSX series of µSD Card comes with the option to enable proprietary features in the firmware to deliver best in class data integrity and strong ECC/RAID support. Enhanced Reliability Firmware addresses the Zero Fault Tolerant requirements of Medical, Aerospace, Military and other data sensitive applications.

EN-L0JXXXGDSX series µSD Cards are great for OEM grade products that require high performance together with the reliability and consistency achieved through the strict locked BOM and locked firmware policy.