TLC Based Industrial Micro SD Cards

TLC Based Industrial Micro SD Cards

	TLC
SERIES/Data Sheet	EN-L0JXXXGGTC
Interface	SD 3.0
Connector	8 Pin
Physical Form Factor	15mm(L) x 11mm(W) x 1mm(H)
Industry Standard	Secure Digital
Flash Type	Toshiba A19 MLC
Density	2GB~1TB
Data Retention	10 years FOB / 1 Year EOL
Operating Temperature	Commercial: 0°C to 70°C Industrial: -40°C to 85°C
Shock	1500 G
Vibration	20 G
Humidity	85% RH 85°C, 1000 Hrs
Read Performance	20MB/s
Write Performance	20MB/2
Voltage	2.7 – 3.6 VDC
Power – Read	100mA to 200mA
Power – Write	100mA to 200mA
Part Number	EN-L0JXXXGGTC

Quick Contact

Your Name:*

Your Email:*

Your Message:*

Envoy Data Memory’s EN-L0JXXXGGTC series of µSD Cards are built with TLC NAND Flash and are a great choice for READ INTENSIVE industrial equipment, embedded computing and data-logging applications. EN-L0JXXXGGTC series Micro Secure Digital Cards are great for consumer grade products that require high performance together with the reliability and consistency achieved through the strict locked BOM and locked firmware policy.

The Secure Digital (SD) card version 3.0 is fully compliant to the specification released by SD Card Association. The Command List supports [Part 1 Physical Layer Specification Ver3.01 Final] definitions. Card Capacity of Non-secure Area, Secure Area Supports [Part 3 Security Specification Ver3.0 Final] Specifications. The SD 3.0 card is based on 9-pin interface, designed to operate at a maximum operating frequency of 208MHz. It can alternate communication protocol between the SD mode and SPI mode. It performs data error detection and correction with very low power consumption. The Card capacity could be more than 64GB and up to 2TB with ex-FAT which is called SDXC (Extended Capacity SD Memory Card). Secure Digital 3.0 card is one of the most popular cards today based on its high performance, good reliability and wide compatibility.