AES256 SLC Hardware Encrypted 2.5″ SATA SSDs

AES256 2.5” SATA SSDs

AES256 SLC Hardware Encrypted 2.5″ SATA SSDs

SERIES/Data Sheet	EN-DA8XXXGDSX
Security	AES 256 Hardware Encryption, SHA 512, RSA2048, TCG OPAL SSC V1.0 Compliant
Password Count	Admin Set to between 6 and 20 failed PW attempts before SSD wipe/erase
Interface	SATA III (up to 6GB/s)
Connector	7 Pin Data / 15 Pin Power
Physical Form Factor	100.00mm (L) x 69.85mm (W) x 7.00mm (H)
Industry Standard	SATA Revision 3.0 – 6 Gbit/s – 600 MB/s
Flash Type	Toshiba 24mm SLC
Density	60GB, 120GB, 240GB, and 480GB
Data Retention	10 years FOB / 1 Year EOL
Operating Temperature	Commercial: 0°C to 70°C
Shock	1500 G
Vibration	20 G
Humidity	85% RH 85°C, 1000 Hrs
Read Performance	up to 460 MB/s
Write Performance	up to 360 MB/s
Voltage	5 VDC
Power – Read	up to 2,700mW
Power – Write	up to 4,205mW
Power – DEVSLP	320mW
Part Number	EN-DA8XXXGDSX

Quick Contact

Your Name:*

Your Email:*

Your Message:*

The EN-DA8XXXGSDX series of SSDs offer Hardware Encryption based on AES 256 Encryption (Advanced Encryption Standard). AES is an industry standard in data security and it has been adopted by U.S. government and now widely used for symmetric-key data encrypting in order to meet higher levels of data security. The EN-DA8XXXGGSDX series is TCG OPAL SSC V1.0 Compliant. OPAL SSC (Security Subsystem Class) is specified by Trusted Computing Group. It is a defined key management systems (KMS) and access control features for self-encrypting drives. This EN-DA8XXXGGDSX uses a pre-boot partition for user authentication only allowing BIOS and OS to complete loading AFTER authentication.

Solid State Drives (SSDs) are very robust and low power replacements for Hard Disk Drives (HDDs). AES256 SSDs have no moving parts, so vibration and shock tolerance are greatly improved over mechanical Hard Disk Drives, resulting in a much better solution for mobile applications. Serial ATA (SATA) SSDs use the standard SATA interface, and are capable of up to 6Gbps transfer rates (SATA III). Our AES256 SATA 2.5″ SSDs are offered in commercial temperature range, made with Single Level Cell (SLC) NAND Flash.