Chat with us, powered by LiveChat

SLC Based Industrial 2.5” SATA SSDs

High Performance SSDs

SLC Based Industrial 2.5” SATA SSDs

Interface SATA III (up to 6GB/s)
Connector 7 Pin Data / 15 Pin Power
Physical Form Factor 100.00mm (L) x 69.85mm (W) x 7.00mm (H)
100.00mm (L) x 69.85mm (W) x 9.50mm (H)
Industry Standard SATA Revision 3.0 – 6 Gbit/s – 600 MB/s
Flash Type Toshiba 24nm
Density 8GB ~ 512GB
Data Retention 10 years FOB / 1 Year EOL
Operating Temperature Commercial: 0°C to 70°C
Industrial: -40°C to 85°C
Shock 1500 G
Vibration 20 G
Humidity 85% RH 85°C, 1000 Hrs
Read Performance up to 520 MB/s
Write Performance up to 495 MB/s
Voltage 5 VDC
Power – Read Up to 2,700mW
Power – Write Up to 4,605mW
Power – DEVSLP Up to 305mW
Part Number EN-D08XXXGDSX

Quick Contact

    Envoy Data Memory’s 2.5” SATA SSD delivers all the advantages of flash disk technology with Serial ATA I/II/III interface, including being fully compliant with standard 2.5-inch form factor, providing low power consumption compared to traditional hard drive and hot-swapping when removing/replacing/upgrading flash disks. The device is designed based on the standard 7-pin interface for data segment and 15-pin for power segment, as well as operating at a maximum operating frequency of 300MHz with 40MHz external crystal. Its capacity could provide a wide range up to 1TB. Moreover, it can reach up to 520MB/s read as well as 420MB/s write high performance based on Toshiba’s 19nm/A19nm Toggle MLC flash (with 256MB/512MB DDR3 cache enabled and measured by CrystalDiskMark v3.0). Meanwhile, the power consumption of the 2.5” SSD is much lower than traditional hard drives.

    Solid State Drives (SSDs) are very robust and low power replacements for Hard Disk Drives (HDDs). SSDs have no moving parts, so vibration and shock tolerance are greatly improved over mechanical Hard Disk Drives, resulting in a much better solution for mobile applications. Serial ATA (SATA) SSDs use the standard SATA interface, and are capable of up to 6Gbps transfer rates (SATA III). Envoy Memory offers a broad selection of 2.5″ SATA SSD products that meet the harsh s of applications in both commercial and industrial markets. Our SLC 2.5″ SATAIII SSDs are offered in commercial or industrial temperature range, made with Single-Level Cell (SLC) NAND Flash.

      Contact Us

      1310 W. Boxwood Ave Gilbert, AZ 85233

      Toll Free: 800-368-6971

      Telephone: 480-829-6565

      Fax: 480-829-9045

        Etiam magna arcu, ullamcorper ut pulvinar et, ornare sit amet ligula. Aliquam vitae bibendum lorem. Cras id dui lectus. Pellentesque nec felis tristique urna lacinia sollicitudin ac ac ex. Maecenas mattis faucibus condimentum. Curabitur imperdiet felis at est posuere bibendum. Sed quis nulla tellus.


        63739 street lorem ipsum City, Country


        +12 (0) 345 678 9


        [email protected]